IN600 Bosch EV14 Fuel Injector Set Honda J-series V6 J37 J35 J32 J30 Style:Type-4 14mm, EV6 clips (unwired) Simply drill two 8mm holes

Simply drill two 8mm holes into the extruded-aluminum F-series fuel rail (not compatible with cast-aluminum H-series or F22A fuel rails)

OEM phenolic shims

Requirements: K-series intake manifold compatible with OEM fuel rail

Connector: Nippon-Denso/Sumitomo

redrilled F-series OEM fuel rail (extruded-style: F22B

IN600 Bosch EV14 Fuel Injector Set Honda J-series V6 J37 J35 J32 J30 Style:Type-4 14mm, EV6 clips (unwired) Simply drill two 8mm holesFlowrate at 43. 5psi: 700cc Gasoline, 630cc N Heptane Quantity: Six (6) Type: Bosch EV14 Length o ring to o ring: 48mm (short) or 60mm (tall) Inlet diameter: 11mm (small) or 14mm (large) Connector: your choice of unwired EV6 clips or wired USCAR to OBD2 adapters Fits: Honda V6 J series (J37, J35, J32, J30). The IN600 fuel injector uses a 16 hole atomizer plate to create two spray cones spread apart at a 20 degree angle. Each cone is 17 degrees wide.