STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long k type Just be aware that the

Just be aware that the charge rate is 1000mA max

It can be used as a bumper sensor which is simple to wire and attach to objects

spare wheel pairs

3V logic Power 5V DC via micro-USB Size ~65 × 30 mm Ships with no pre-soldered GPIO header

making it the one to grab for night vision and low-light work

STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long k type Just be aware that theAdafruit STEMMA QT Qwiic JST SH 4 pin cable. Plug and play I2C wiring for STEMMA QT and SparkFun Qwiic boards no soldering, no jumper mess. Just over 100mm long, female JST SH connectors on both ends. Symmetrical, so either end plugs into your board. Specs Connector JST SH female, 4 pin Pitch 1mm Length 100mm (about 4 inches) Ends Female on both sides Interface I2C STEMMA QT Qwiic Red 3. 3VDC power Black Ground Blue I2C SDA (data) Yellow I2C SCL