Schwenk 31200501 Indicating plug Gauge OD Range 140.1-150 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Levels Turret drive: Motor driven and

Turret drive: Motor driven and manual operation

Radius size is stamped on each gage leaf

Equivalent to Q-Mark part number: TM2-2520-S

001mm Anvil/Spindle Material Carbide Thimble Type Friction SPC Output No Accuracy

Sylvac S_CAL EVO µM Caliper 0-150mm 30-810-9506

Schwenk 31200501 Indicating plug Gauge OD Range 140.1-150 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Levels Turret drive: Motor driven andApplication For quick comparison measurements of bores during series inspections. The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore. Execution Cemented carbide measuring contacts and measuring needles (wear resistant) Plug gauge from dia. 130 mm can be supplied as a cross shaped sleeves or cross shaped sleeves with skids Version for blind holes with reduced face size Advantage Easy to use Minimum measuring