Prepreg 3K, 2x2 Twill Weave Carbon Options:50" Wide - Cut to length by yard Allow casting to set for

Allow casting to set for 12 to 18 hours at room temperature before an oven post cure of 8 hours at 150°F to 165°F

Number of FIlaments: 24K

The mixed viscosity with both hardeners allows the material to flow very well

#1041 Duratec Gray Surfacing Primer or Tooling Gel Coat can be sprayed over the PVA to obtain a proper mold surface

Fabrics need to be oriented so the fiber yarns run parallel to the expected loads

Prepreg 3K, 2x2 Twill Weave Carbon Options:50" Wide - Cut to length by yard Allow casting to set forThis prepreg carbon fabric features our most popular twill weave carbon, pre impregnated with an epoxy resin system. The near perfect resin content (37%, + 3%) maximizes the strength properties of the carbon fabric. You don't have to worry about resin ratio, paving the way for repeatable, uniform parts. The 3K tow fabric (3000 filaments per fiber) is similar to our part #1069,with an ultimate tensile strength of at least 510 KSI. As compared to plain