CAST PISTONS EVO 80CI 10.5:1 .010 fitment_Polaris-UTV_RZR_2020 IF YOU HAVE 1 3/4"

IF YOU HAVE 1 3/4" OR POLARIS PRO FIT CAGES

Piggy back reservoir • Performance High-Flow Piston • Precisely valved and tuned • 3/4” Chrome Shaft • PTFE Lined Spherical Bearings • Progressive Closed Cellular Bump Stop • Shot Peened & Preset Chrome Silicone Wire Springs • Dual Rate Spring Rate Tuning • Adjustable Billet Crossover Rings • Billet Compression Adjuster • Spherical Rebound Adjuster • MADE IN THE USA

(silicone is recommended for installation

The Primary Low Boot is a little shorter than the Primary Engineer

2” X0-IFP Series Rear EXIT Shocks help you get the ride quality and performance you need and gain up-to 2” of true suspension lift by simply bolting them on

CAST PISTONS EVO 80CI 10.5:1 .010 fitment_Polaris-UTV_RZR_2020 IF YOU HAVE 1 3/4"KB Hypereutectic alloy pistons are cast with a 16% high silicon content that has very high thermal barrier properties along with a low thermal expansion rate, allowing tight piston to cylinder wall clearances. This makes them ideal for air cooled engines, offering optimal ring seal, quieter engine running and reduced wear. Hypereutectics are best suited for stock or mild compression ratios up to 10. 5: 1 running on pump fuel.