T3 Oil Feed Flange 1/4" NPT Clamp * Branded as TI automotive

* Branded as TI automotive on the pumps (Parent Company of Walbro)

3x 1/8" BSPP outlet ports

Part Number: YS01-MB-DPS007

The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind

- Nissan Skyline GC10 68-72

T3 Oil Feed Flange 1/4" NPT Clamp * Branded as TI automotiveTurbo Flange Oil Feed When you have a new turbo you will need to run oil lines into the turbo. A lot of aftermarket turbos have the need for a turbo feed flange and this is a universal flange and if this is the right bolt spacing for your turbo this is the flange for you. Measurements: Centre hole 1 4" NPT Thread Centre to Centre bolt holes 38. 55mm Fitment: T3 T3 T4 T3 T4 T04E T04B T4 Garret and other turbos also! High temperature Resistance will not