UMI Performance Adjusting Sleeves/Hardware/Rod Ends/Spacers Bump Steer Kit GM G-Body 1978-88 Bump Steer Adjuster Tie Rod End Carb center-to-center distance: 5-1/2"

Carb center-to-center distance: 5-1/2"

or if you want to do a show-quality job with no compromise in quality

5mm wire to terminals

1-3/4" between the bottom of the float and the bowl cover gasket surface

Available with or without on-board GPS receiver and antenna

UMI Performance Adjusting Sleeves/Hardware/Rod Ends/Spacers Bump Steer Kit GM G-Body 1978-88 Bump Steer Adjuster Tie Rod End Carb center-to-center distance: 5-1/2"UMI's F Body and G Body bump steer kit is designed to reduce or eliminate toe change during suspension travel (also known as bump steer"). Reduction of bump steer improves handling and straight line stability and enhances overall precision of the steering system. These direct bolt in kits allow the builder to relocate the outer tie rod end lower than stock (or higher if necessary). The stud taper is designed for exact factory fit for each application