Surfboard Sanding Resin Size:Pint-16oz General Purpose Laminating Polyester Resin

General Purpose Laminating Polyester Resin is recommended for applications hand lay -up or spray-up operations

8" 100% Wool Heavy Cut Buffing Pad - Double-Sided Cutting & Polishing Pad

Apply Partall® Paste #2 according to instructions prior to use of parting film

Silmar 249A Clear Resin + Brightener

The rocker and foil will accommodate a wide variety of bottom contours

Surfboard Sanding Resin Size:Pint-16oz General Purpose Laminating Polyester ResinSilmar 250A is the standard Sanding surfboard resin used for the final coat on surfboards. This resin cures with a hard, nontacky surface, contains wax and Must be sanded before applying any additional coats. When the catalyzed resin is applied as a final coat to the laminate coats of resin, the wax rises to the top, sealing off the air and allows the resin to cure to a hard finish, which can then be sanded, painted or gel coated. NOTE: Cannot be used